banner



How To Change Ink In Epson Xp 434

How do I alter the ink cartridges?

  • See beneath.

    Removing and Installing Ink Cartridges

    Make certain you have your replacement cartridges handy before you brainstorm. You must install new cartridges immediately subsequently removing the old ones.

    Caution:
    Go out your old cartridges in the printer until you are ready to replace them to prevent the print caput nozzles from drying out. Do non open ink cartridge packages until you lot are fix to install the ink. Cartridges are vacuum packed to maintain reliability.

    1. Turn on your production.
      • If an ink cartridge is expended, you lot see a message on the LCD screen. Note which cartridges need to be replaced and press the OK push button, then choose Replace now.
      • If yous are replacing a cartridge before you encounter a message on the LCD screen, printing the  home push button if necessary, and select Setup. Select Maintenance, then select Ink Cartridge Replacement and press the OK button.
    2. Elevator up the scanner unit.

      Caution:
      Practise not motility the print head by mitt; otherwise, you may damage your production. Do not touch on the flat white cable within the printer.

    3. Squeeze the tab on the cartridge and lift the cartridge straight upwardly to remove it.

      Note: Dispose of used cartridges carefully. Do non have the used cartridge apart or endeavour to refill it.

      Warning: If ink gets on your skin, wash information technology thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a dr. right away. Proceed ink cartridges out of the reach of children.

    4. Before opening the new cartridge package, milkshake it gently four or five times.

      Caution:
      Practice not shake the cartridges afterwards opening the packages, or ink may leak.

    5. Remove the cartridge from the package.

      Caution:
      Do non touch the greenish chip on the cartridge. Install the new cartridge immediately later removing the old ane; if you exercise non, the impress head may dry out and be unable to print.

    6. Remove the yellow tape from the side of the cartridge.

      Circumspection:
      Do not remove any other labels or seals, or ink will leak.

    7. Insert the new cartridge into the holder and push it down until information technology clicks into place.
    8. Lower the scanner unit and press the  start push button.

      The impress caput moves to its home position and the printer starts charging the ink. This takes about ninety seconds. When y'all see a confirmation message on the screen, ink charging is finished.

      Caution:
      Never plough off the product while the power light is flashing or you will waste ink.

      If you encounter an error screen telling you an ink cartridge is installed incorrectly, elevator up the scanner unit and press the ink cartridge downwardly until it clicks into place. When you're finished, press the OK button.

    If yous remove a depression or expended ink cartridge, you cannot re-install and employ the cartridge.

    Circumspection:
    If y'all remove an ink cartridge for after use, protect the ink supply area from dirt and dust and store information technology in the same surroundings as the printer. The valve in the ink supply port is designed to comprise whatever excess ink, but exercise non touch the ink supply port or surrounding area. Ever store ink cartridges with the label facing up; do non store cartridges upside-down.

    Related concepts
    Purchase Epson Ink Cartridges

Published:  Mar 24, 2016 Was this helpful?​ Thank you for the feedback!

Source: https://epson.com/faq/SPT_C11CE59202~faq-293806

Posted by: braatenhournich.blogspot.com

0 Response to "How To Change Ink In Epson Xp 434"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel